solstice-ci/deploy/podman

Solstice CI — Production deployment with Podman Compose + Traefik

This stack deploys Solstice CI services behind Traefik with automatic TLS certificates from Let’s Encrypt. It uses upstream official images for system services and multi-stage Rust builds on official Rust/Debian images that rely on container layer caching (no sccache) for fast, reproducible builds.

Prerequisites

• Podman 4.9+ with podman-compose compatibility (podman compose)
• Public DNS records for subdomains pointing to the host running this stack
• Ports 80 and 443 open to the Internet (for ACME HTTP-01), see Rootless note below
• Email address for ACME registration

Rootless Podman note (ports 80/443)

• Rootless Podman cannot bind privileged ports (<1024). If you run this stack rootless, set high host ports in .env:
  • TRAEFIK_HTTP_PORT=8080
  • TRAEFIK_HTTPS_PORT=4443
• With high ports, public HTTPS will be served on 4443 and the ACME HTTP-01 challenge will not work unless you forward external port 80 to host 8080 (e.g., via a firewall/NAT) or place another reverse proxy in front.
• To use real public certificates with HTTP-01 directly on this host, either:
  • Run Podman as root (rootful) for Traefik only, or
  • Allow unprivileged port binding for your kernel by setting (requires root): sysctl -w net.ipv4.ip_unprivileged_port_start=80 and add net.ipv4.ip_unprivileged_port_start=80 to /etc/sysctl.conf to persist.
• Alternatively, switch Traefik to a DNS-01 challenge (not configured here) if you control DNS.

DNS Create A/AAAA records for the following hostnames under your base domain (no environment in hostname; env separation is logical via DB/vhost/buckets):

• traefik.svc.DOMAIN
• api.svc.DOMAIN
• grpc.svc.DOMAIN
• runner.svc.DOMAIN
• forge.svc.DOMAIN (Forge/Forgejo webhooks)
• github.svc.DOMAIN (GitHub App/webhooks)
• minio.svc.DOMAIN (console UI)
• s3.svc.DOMAIN (S3 API, TLS via TCP SNI)
• mq.svc.DOMAIN (RabbitMQ mgmt UI; AMQP remains internal)

Quick start

1. Copy env template and edit secrets and settings: cp .env.sample .env

   Edit .env (ENV=staging|prod, DOMAIN, passwords, ACME email)

2. (Optional) Use Let’s Encrypt staging CA to test issuance without rate limits by setting in .env: TRAEFIK_ACME_CASERVER=https://acme-staging-v02.api.letsencrypt.org/directory
3. Bring up the stack: podman compose -f compose.yml up -d --build
4. Monitor logs: podman compose logs -f traefik

Services and routing

• Traefik dashboard: https://traefik.svc.${DOMAIN} (protect with TRAEFIK_DASHBOARD_AUTH in .env)
• Orchestrator HTTP: https://api.${ENV}.${DOMAIN}
• Orchestrator gRPC (h2/TLS via SNI): grpc.${ENV}.${DOMAIN}
• Forge webhooks: https://forge.${ENV}.${DOMAIN}
• GitHub webhooks: https://github.${ENV}.${DOMAIN}
• Runner static server: https://runner.${ENV}.${DOMAIN}
• MinIO console: https://minio.svc.${DOMAIN}
• S3 API: s3.svc.${DOMAIN}
• RabbitMQ management: https://mq.svc.${DOMAIN}

Environment scoping (single infra, logical separation)

• RabbitMQ: single broker; per-environment vhosts named solstice-${ENV} (staging/prod). Services connect to amqp://.../solstice-${ENV}.
• Postgres: single cluster; databases solstice_staging and solstice_prod are created by the postgres-setup job. Services use postgres://.../solstice_${ENV}.
• MinIO: single server; buckets solstice-logs-staging and solstice-logs-prod are created by the minio-setup job. Set S3 bucket per service to the env-appropriate bucket.

Security notes

• Secrets are provided via podman compose secrets referencing your environment variables. Do not commit real secrets.
• Only management UIs are exposed publicly via Traefik. Data planes (Postgres, AMQP, S3 API) terminate TLS at Traefik and route internally. Adjust exposure policy as needed.

Images and builds

• System services use Chainguard images (postgres, rabbitmq). MinIO uses upstream images.
• Rust services are built with multi-stage Containerfiles using cgr.dev/chainguard/rust and run on cgr.dev/chainguard/glibc-dynamic.
• Build caches are mounted in-build for cargo registry/git and the cargo target directory (via ~/.cargo/config target-dir=/cargo/target).

Maintenance

• Upgrade images by editing tags in compose.yml and rebuilding: podman compose build --pull
• Renewals are automatic via Traefik ACME. Certificates are stored in the traefik-acme volume.
• Backups: persist volumes (postgres-data, rabbitmq-data, minio-data, traefik-acme).

Tear down

• Stop: podman compose down
• Remove volumes (DANGEROUS: destroys data): podman volume rm solstice-ci_traefik-acme solstice-ci_postgres-data solstice-ci_rabbitmq-data solstice-ci_minio-data

Troubleshooting

• Certificate issues: check Traefik logs; verify DNS and ports 80/443. For testing, use ACME staging server.
• No routes: verify labels on services and that traefik sees the podman socket.
• Healthchecks failing: inspect service logs with podman logs .
• Arch Linux/Podman DNS timeouts (ACME): If Traefik logs show errors like "dial tcp: lookup acme-v02.api.letsencrypt.org on 10.89.0.1:53: i/o timeout", this is typically a Podman network DNS (netavark/aardvark-dns) issue. Fixes:
  • We now set explicit public DNS resolvers for the Traefik container in compose.yml (1.1.1.1, 8.8.8.8, 9.9.9.9). Redeploy: podman compose up -d traefik.
  • Ensure Podman’s network backend and DNS are installed and active (Arch): pacman -S netavark aardvark-dns; systemctl enable --now aardvark-dns.socket; verify podman info | grep -i network shows networkBackend: netavark.
  • Alternatively, mount the host resolv.conf into Traefik: add to the traefik service volumes: - /etc/resolv.conf:/etc/resolv.conf:ro
  • Check firewall (nftables): allow UDP/TCP 53 from the Podman bridge (e.g., 10.89.0.0/24) to host 10.89.0.1; allow FORWARD for ESTABLISHED,RELATED.
  • Inspect network: podman network inspect podman; consider creating a custom network with explicit DNS servers: podman network create --dns 1.1.1.1 --dns 8.8.8.8 solstice-net and set networks.core.name to that network in compose.yml.
  • As a last resort, run Traefik with host networking: network_mode: host (then remove ports and ensure only Traefik is exposed), or switch ACME to DNS-01.

Ubuntu host setup for libvirt/KVM and image directories

These steps prepare an Ubuntu host so the orchestrator (running in a container) can control KVM/libvirt and manage VM images stored on the host.

1. Install libvirt/KVM and tools

• sudo apt update
• sudo apt install -y qemu-kvm libvirt-daemon-system libvirt-clients virtinst bridge-utils genisoimage
• Ensure the libvirt service is running:
  • systemctl status libvirtd
  • If inactive: sudo systemctl enable --now libvirtd

2. User permissions (KVM and libvirt sockets)

• Add your deployment user (the one running podman compose) to the required groups:
  • sudo usermod -aG libvirt $USER
  • sudo usermod -aG kvm $USER
• Log out and back in (or new shell) for group membership to take effect.

3. Default libvirt network

• Make sure the default network exists and is active (compose defaults LIBVIRT_NETWORK=default):
  • virsh net-list --all
  • If missing, define it from the stock XML or create a new NAT network.
  • If present but inactive:
    • virsh net-start default
    • virsh net-autostart default

4. Prepare host directories for images and work data

• Base images directory (bind-mounted read/write into the orchestrator container):
  • sudo mkdir -p /var/lib/solstice/images
  • sudo chown "$USER":"$USER" /var/lib/solstice/images
• Orchestrator work directory for overlays and console logs:
  • sudo mkdir -p /var/lib/solstice-ci
  • sudo chown "$USER":"$USER" /var/lib/solstice-ci
• In deploy/podman/.env(.sample), set:
  • ORCH_IMAGES_DIR=/var/lib/solstice/images
  • ORCH_WORK_DIR=/var/lib/solstice-ci

5. Map the image list (image map YAML)

• Point ORCH_IMAGE_MAP_PATH at your production image map on the host (kept in git or ops repo):
  • ORCH_IMAGE_MAP_PATH=/etc/solstice/orchestrator-image-map.yaml
• The orchestrator looks for /examples/orchestrator-image-map.yaml in the container; compose binds your host file there read-only.
• Ensure each images[*].local_path in the YAML points inside /var/lib/solstice/images (the in-container path is the same via the bind mount). The provided example already uses that prefix.

6. Bring up the stack

• podman compose -f compose.yml up -d --build
• The orchestrator will, on first start, download missing base images as per the YAML into ORCH_IMAGES_DIR. Subsequent starts reuse the same files.

Notes

• Hardware acceleration: compose maps /dev/kvm into the container; verify kvm is available on the host: lsmod | grep kvm and that your CPU virtualization features are enabled in BIOS/UEFI.
• Sockets and configs: compose binds libvirt control sockets and common libvirt directories read-only so the orchestrator can read network definitions and create domains.
• If you change LIBVIRT_URI or LIBVIRT_NETWORK, update deploy/podman/.env and redeploy.

Runner binaries (served by the orchestrator)

• Purpose: Builder VMs download workflow runner binaries from the orchestrator over HTTP.
• Host directory: Set RUNNER_DIR_HOST in deploy/podman/.env. This path is bind-mounted read-only into the orchestrator at /runners.
  • Example (prod default in .env): RUNNER_DIR_HOST=/var/lib/solstice/runners
  • Example (dev default in .env.sample): RUNNER_DIR_HOST=../../target/runners
• URLs: Files are served at http(s)://runner.${ENV}.${DOMAIN}/runners/{filename}
  • Example: https://runner.prod.${DOMAIN}/runners/solstice-runner-linux
• Orchestrator injection: The orchestrator auto-computes default runner URLs from its HTTP_ADDR and contact address and injects them into cloud-init.
  • You can override via env: SOLSTICE_RUNNER_URL (single) and SOLSTICE_RUNNER_URLS (space-separated list) to point VMs at specific filenames.
• To build/place binaries:
  • Build the workflow-runner crate for your target(s) and place the resulting artifacts in RUNNER_DIR_HOST with stable filenames (e.g., solstice-runner-linux, solstice-runner-illumos).
  • Ensure file permissions allow read by the orchestrator user (world-readable is fine for static serving).
• Traefik routing: runner.${ENV}.${DOMAIN} routes to the orchestrator’s HTTP port (8081 by default).

Forge integration configuration

• The forge-integration service will warn if WEBHOOK_SECRET is not set: it will accept webhooks without signature validation (dev mode). Set WEBHOOK_SECRET in deploy/podman/.env to enable HMAC validation.
• To enable posting commit statuses back to Forgejo/Gitea, set FORGEJO_TOKEN and FORGEJO_BASE_URL in deploy/podman/.env. If they are not set, the service logs a warning (FORGEJO_* not set) and disables the job result consumer that reports statuses.
• The compose file passes these variables to the container. After editing .env, run: podman compose up -d forge-integration

Traefik ACME CA server note

• If you see a warning about TRAEFIK_ACME_CASERVER being unset, it is harmless. The compose file now defaults this value to empty so Traefik uses the production Let’s Encrypt endpoint. To test with staging, set TRAEFIK_ACME_CASERVER=https://acme-staging-v02.api.letsencrypt.org/directory in .env and redeploy Traefik.